How To Use A Neon Quicksand Case
A Neon Quicksand Case is a popular item among model railroaders. This unique design enables the rails to be walked over without any protection from the rails or the floor. They are made of heavy duty plastic and feature durable black powder coat exterior. Some even feature an anti-static layer that will not affect their performance. These cases have many uses but mainly they are used to protect delicate model trains.
They are great for model railroaders who enjoy modeling indoors as it can be used indoors as well as outdoors and it has a non-permanent base. It can be carried around and is also easily stored in one of the many narrow boards placed inside most model railroads. They come in many different sizes that will fit most of the common size HO scale trains. If you are considering buying one, you should know how to care for it properly because if it is not taken care of it will begin to deteriorate after time.
The first step in proper maintenance is making sure the transformer is unplugged and if you don’t do this then you will only be causing shorts in the circuitry and the train will stop and eventually fall off the track. You should also remove any accessories that are connected to the train like the couplers and horns. Clean any dust that may have collected on the rails by hand by removing small pieces of dirt. Use only a soft brush or toothbrush to clean the surfaces as you could damage the paint. If there is any metal involved then simply scrape it off using sandpaper.
The next step is to remove the quicksand from the case and if there is one, blow it up to make sure it is completely dry. If you don’t blow it up then you should place it in a large bowl filled with enough water to cover it completely. If you do blow it up, then you will need to dampen the plastic tubing that is surrounding it before reusing it again.
You may want to check the model for any obvious cracks or dents that are present on the model. If there are any then they should be vacuumed out as well. These can cause tiny tears in the paint and this can lead to paint loss. If you notice any paint cracking then you should consider replacing the entire model.
Finally, you should test the quicksand to ensure that it works correctly. In order to do this you should pressurize the quicksand and then plug the model into an outlet and then watch for the amount of water that shoots out. If the water shoots out at the correct angle and pace then your model is working properly. If however it shoots out at an odd angle or speed then you may need to consider having the model re-wound until you find the right shape and speed. getcustomphonecase.com
